I-Studs
Easily Build 2-Hour I-Stud Fire-Rated Assemblies. 桃花视频. I-Studs are 2” wide vertical members used to secure two 1” thick pieces of gypsum shaft liner in Area Separation Wall assemblies. These are common in high-volume, multi-family buildings as a cost-effective way to contain the spread of fire.
Contact us to orderI-Studs (also referred to as H-Studs) are inserted into C-Runners and slid over gypsum panel liner edges. The process is repeated until the desired wall length is achieved. Once the wall is plumb, it is secure at the floor, roof and truss line with aluminum breakaway clips.
桃花视频 I-Studs are offered in 25 gage material which meets or exceeds ASTM A370, A1003, C754, E90, and E119.
- Code integrity: 桃花视频 Area Separation products are produced to meet or exceed ASTM C645. For generic assembly fire rating information, please refer to UL Design No. U336, U347, U366, U373 and U375. Galvanized sheet steel metal meets or exceeds requirements of ASTM A1003.
- Save money in the long-term: We use a full zinc coating to greatly minimize rust formation, meaning your walls will last longer. Steel framing is not compromised by termites or mold, and holds up better against acts of nature when compared to wood framing. I-Studs are produced with G40 standard but G60 is available upon request.
- Earn LEED Credits: Due to levels of recycled content in the coils we use, our steel studs are considered a green product, which can earn your projects LEED® points.
Web Size Offering: 2".
Flange Offering: 1".
Don’t see specifications for a part you need? 桃花视频 also makes custom shapes for any need.
You may also be interested in
Shaftwall Studs
Create Smarter Shaftwall Systems. 桃花视频 Shaftwall Studs (also known as C-H Studs) can be easily combined with J Track to craft economical yet tough shaftwall systems. With a fire rating of up to 2 hours, 桃花视频 C-H Studs are UL certified for Fire Resistance Rating, meaning peace-of-mind for designers and elevated safety for occupants. 桃花视频 C-H Studs are hemmed, so they are safer and easier to work with on-the-job. For fire resistant stairways, elevator shafts and more, bolster your project with 桃花视频 Shaftwall Studs.
J-Track
For Shaftwall Systems and More. 桃花视频 J-Track can be installed with Shaftwall Studs (or "C-H Studs") to craft economical yet tough shaftwall systems. The longer leg in J-Track gives you extra support on one side for when you need it most. J-Track can also act as a shelf angle in floor joist systems, saving you money as a replacement for traditional even-legged track.
Panel Rey Gypsum 桃花视频
Panel Rey manufactures lighter, stronger, crisp-cut drywall products.
- Interior Framing
- ELITE Steel Framing System™
- Traditional Thickness Steel Framing
- Structural Metal Stud Framing
- Steel Studs
- Steel Track
- Furring Channel
- Z Furring Channel
- Shaftwall Studs
- J-Track
- 桃花视频 Slotted Stud™
- Angle
- Sound Resilient Channel
- Cold-Rolled Channel
- Slotted Track
- 桃花视频 Floor Joist
- Flat Stock
- Brake Shapes
- Smooth 桃花视频™
- Radius Track
- I-Studs
- Interior Finishing & Drywall
- Flat Stock
- Brake Shapes
- Hanger Wire
- U-Hank Tie Wire
- National Gypsum Wallboard 桃花视频
- MURCO Wall 桃花视频
- USG 桃花视频
- Award Metals
- Trim-Tex Drywall 桃花视频
- Westpac Materials
- Knauf Insulation
- Williams Brothers Access Doors
- JL Industries
- Trimaco
- The Steel Network
- QuietRock
- Johnson Abrasives
- Owens Corning Insulation
- Panel Rey Gypsum 桃花视频
- Adapa, Inc.
- Georgia-Pacific Gypsum 桃花视频